Ductless Mini-Split Installation & Repair

Some rooms were never on the plan. The converted garage, the shop out back, the bonus room upstairs. Running the whole house harder has never fixed them, and it never will.

  • Licensed & insured · TACLA140201E
  • Every major make and model serviced
  • Upfront pricing before work begins

Cooling

Mini-Split Installation in Mesquite and East Dallas

There is usually one room. It bakes in August, it freezes in January, and the only thing that has ever helped is dropping the thermostat for the whole house until that one space is tolerable. Around east Dallas it's nearly always a converted garage, a detached shop, or the bonus room over the garage — and out toward Forney, Terrell and Kaufman, a barndominium.

A ductless mini-split is a small outdoor unit tied to one or more indoor heads by a refrigerant line set instead of ducts. It heats and cools that space alone, on its own control, without asking the rest of the house to change. We're owner-run out of Mesquite, and this side of the metro has plenty of exactly this square footage.

A mini-split is usually the right call when:

  • The space was converted or finished after the original system was designed
  • Reaching it with new duct would mean a long run across a hot attic
  • It needs its own temperature, not whatever the rest of the house is set to
  • There's no practical route for supply and return air, as in a detached building

Call (469) 769-2812 or send the form, and we'll look at the space before anyone puts a number on it.

Contact Us

Send this over and we'll call you back. If the house is already warm, phoning is faster.

A ductless mini-split indoor head mounted high on the wall of a converted garage set up as a home gym, running above the equipment below

The Rooms This Actually Solves

Garage conversions are the most common by a distance. Drywall goes up, flooring goes down, a gym or an office moves in, and nobody adds cooling because the main system sits right there in the attic. It can't keep up: it was sized for the house that existed before the garage joined it. The shop, the barndominium and the sunroom arrive at the same place by different routes.

  • Converted garages used as gyms, offices and playrooms
  • Detached workshops with no duct to extend
  • Barndominiums and metal buildings finished out for living
  • Sunrooms and patio enclosures carrying a lot of glass
  • Bonus rooms over the garage the system never reached
  • Primary bedrooms at the far end of a long duct run
The outdoor unit of a ductless mini-split on a pad beside a brick Texas home, with the insulated line set running up into a neat sleeved wall penetration

Why Extending the Ductwork Usually Isn't It

The instinct is to branch a new run off the existing system. Sometimes that works. Often it doesn't, and the culprit is the attic: a duct crossing it in August is pushing air through an oven, so whatever capacity you send down that run arrives diminished.

Then there's the load. Pulling from the existing system makes the rest of the house pay for it in longer runtimes. A mini-split sidesteps both problems. The refrigerant line carries the capacity, so nothing bleeds off into the attic, and the head has its own control, so one space can sit where you want it without moving the whole house.

A technician holding a level against the mounting bracket for a mini-split indoor head on an interior wall before the unit goes up

What We'll Tell You Before You Buy One

Two things put people off, and both are fair. The indoor head is visible: it mounts high on the wall and looks like what it is, so decide how you feel about that before the install rather than after. There's also an outdoor unit and a small sleeved penetration where the line set leaves the wall.

The bigger caveat is that a mini-split is the wrong answer when the real fault sits in the ducts you already have. A crushed flex run, a boot off its collar, or an undersized return makes a room miserable the same way, and a second system on top just buries a defect you keep paying for. If that's what we find, we'll point you at duct repair instead.

What the visit involves

  1. 01

    We Walk the Space

    We measure the room and look at insulation, glass, ceiling height and how you use it, then settle how many heads it needs and where the outdoor unit sits.

  2. 02

    You Get a Written Plan

    The zone layout, the equipment and the price reach you in writing before anything is ordered. Financing is available on approved credit.

  3. 03

    We Mount and Run the Line Set

    Bracket set and leveled, one clean penetration carrying refrigerant, condensate and power, and the outdoor unit sited clear of the mower and the sprinkler heads.

  4. 04

    We Commission It

    The line set is pressure-tested and vacuumed down before the charge is released. Then we run it in cooling and heating and hand over the controls.

5.0

Every Google review. Five stars.

Read the Reviews

Ductless Mini-Split across Mesquite and east Dallas

  • Mesquite(HQ)
  • Garland
  • Balch Springs
  • Sunnyvale
  • Rowlett
  • Forney
  • Seagoville
  • East Dallas
  • Rockwall
  • Wylie
  • Terrell
  • Kaufman
All Service Areas

Not on the list? Call, and if we can get a truck there, we usually will.

Finance available.

A failed system shouldn't mean a lump sum in the same week. Financing on approved credit, for repairs and new installs alike.

See Financing Options

Asked every week

If yours isn't here, call and ask. We'd rather answer it now than have you guess.

Ask Us Directly

Will a mini-split heat as well as cool?

Yes. It's a heat pump, so the same equipment reverses and heats the space in winter. For a garage gym or a workshop that matters as much as the cooling does, because those rooms go unused in January too.

Can one outdoor unit handle more than one room?

Often, yes. Multi-zone systems run several indoor heads from one outdoor unit, each on its own control, which suits a garage conversion plus the bonus room above it. Which way is better comes down to the layout and where the line sets can run.

What does a mini-split cost to install?

It depends on the number of heads, the capacity the space needs and how far the line set travels, so we won't guess over the phone. You get the figure in writing once we've seen the room, before anything is ordered, with financing available on approved credit.

My whole upstairs is warm. Is a mini-split the fix?

Possibly not. A whole floor that won't cool usually points at the ductwork or an undersized return rather than a missing zone, and we'd rather find that first. A crushed run or a disconnected boot is a cheaper fix than a second system.

Do you service mini-splits you didn't install?

Yes. We service and repair every major make and model, so a head that's icing up, dripping condensate or throwing an error code is a normal call, whoever installed it.

Alex, the owner of Climatech Heating and Air, beside the service truck at golden hour

Ready when the Texas weather isn't

24-hour service Monday through Saturday, out of Mesquite. Call and talk to the owner, or send the request and we'll call you.

More from Climatech

All Services